Lightmark S1 is a revolutionary surface-level installed model of the Lightmark series.
Lightmark S1 is built for single-direction lane delineation and is installed at surface-level as opposed to conventional above surface pavement markers.
The special design of the unit's illumination surface as a hologram ensures that although the unit is installed under the surface, the light it emits will beam out at an appropriate angle and will be visible to a long distance as if it was installed above the surface.
Surface level installation contributes to road safety. Light vehicles such as motorcycles are very vulnerable to uneven road surfaces especially at high speeds.
Surface-level models are less prone to wear and tear and last longer than above ground devices.
Technical Specifications
Design
Dimensions
Length
Width
Height
4"1/4"
4"3/32"
2"1/32"
106mm
103mm
51mm
Rising above surface level
1/8" / 4mm
Weight
1.74lbs / 790g
Material
Top cover
Polycarbonate
Body
Aluminum
Solar panel type
Mono-Crystalline panel
Sealing
Silicone
Operation
Illumination technology
?10 L.E.D. x 3
On/Off level
150 lux / 370 lux
Electronic lifecycle
Up to 10 years
Warranty
2 years
Available flash patterns
Steady, Flashing
Charging time
3 Hours (sunny) to 8 hours (cloudy or rainy)
Operation per charge cycle
Up to 14 hours
Energy storage
Storage unit type
Ultracapacitor
Capacity
1 x 120F
Environmental
Temperature range
-13F to +140F / -25C to +60C
Compressive strength
1,000kg/cm
Waterproof
IP 67
Lighting
Available colors
White, Blue, Red, Green, Amber
Light visibility distance
Up to 1,600 feet / 500m (varies according to weather conditions)
