Lightmark T1 is a single-direction on-surface active pavement marker of the Lightmark series for single-direction lane delineation.

Dangerous blind corners and sharp-curves, black spots and poorly lit areas Areas with inclement weather conditions (coastal roads, foggy areas, wet and rainy regions, etc.) Joint intersections, on and off ramps, center lines and dividers, entrance warnings, carpool lanes, bridges Guidance lines, traffic islands, roundabouts, aprons, mountain roads Crosswalks, bike and pedestrian lanes Airport Taxi lanes and runways Ships and watercrafts decks Entertainment areas, parking lots, hotel entrances, gas stations and many more!
Technical Specifications
Design
Dimensions - Body	Length Width Height 3"15/16" 4" 3/4" 100mm 100mm 20mm
Dimensions - Anchor	1"5/8" x ?1"18" 40mm x ?28
Weight	320g / 0.66lbs
Material
Top cover	Polycarbonate
Body	Aluminum or Plastic
Solar panel type	Mono-Crystalline panel
Reflector	True Cube-Corner type reflex (U.V stabilized Lexan #143)
Operation
Illumination technology	2 L.E.D. (each side)
On/Off level	50 Lux
Electronic lifecycle	Up to 10 years
Warranty	1 years
Available flash patterns	Steady, Flashing
Charging time	3 Hours (sunny) to 8 hours (cloudy or rainy)
Operation per charge cycle	Up to 14 hours
Energy storage
Storage unit type	Ultracapacitor
Capacity	150F
Environmental
Temperature range	-40F to +176F / -40C to +80C
Compressive strength	1,000kg/cm
Lighting
Available colors	White, Blue, Red, Green, Amber
Luminance level	5,000mcd per side
Light visibility distance	Up to 3,300 feet / 1000m (varies according to weather conditions)

	Thanks to the revolutionary Ultra Capacitor Technology , our product's lifespan is approximately 10 years! Five times longer than the conventional battery-based devices in use in the market today. Solarpath's product reliability and long life span, combined with zero maintenance are an EXTREMELY cost-efficient solution for any road marking needs.
	Unlike standard battery operated devices, our capacitor-based products are environmentally safe and use a "dry" energy source which does not contain harmful acids and will never leak. Handling and disposal are easy and inexpensive.
	No wiring and no external energy source needed - making it extremely flexible in design and implementation. No maintenance or professional electricians required. Our devices operate at a very low voltage and are hermetically sealed thus making installation very safe for the installers and public.
	A variety of different color L.E.Ds and product sizes is available for easy customization and for installation in any environment and design.